Com Frequencies; Recent Com Frequencies; Com User Frequencies - Garmin GTR 225 Pilot's Manual

3.2 COM Frequencies

The COM Frequency List contains recently used frequencies (Recent), user-
defined frequencies (User), a database of all frequencies provided in the
standard default memory (Database), and nearest airport, Area Control Center
(ACC), Flight Service Station (FSS), and weather frequencies (WX).

3.2.1 Recent COM Frequencies

The last twenty COM frequencies used are kept in the list of recent COM
frequencies.
NOTE: When switching from 8.33 kHz to 25 kHz mode, any 8.33 kHz-specific
user frequencies will be deleted from the user frequency list. This only
affects the user frequencies within the 8.33 kHz spectrum.
1. Press MEM.
2. Turn the inner knob to select an entry (1-20).
3. Press FLIP/FLOP to set the selected frequency as the active frequency.
Press ENT to set the selected frequency as the standby frequency.

3.2.2 COM User Frequencies

Fifteen COM user frequencies can be saved with an assigned waypoint (WPT)
identifier and type.
NOTE: When switching from 8.33 kHz to 25 kHz mode, any 8.33 kHz-specific
user frequencies will be deleted from the user frequency list. This only
affects the user frequencies within the 8.33 kHz spectrum.
3-2
Recent COM Frequencies
Waypoint Name
COM User Frequencies
Garmin GTR 225/225A/225B Pilot's Guide
Entry
Selected Frequency
Frequency
Waypoint Type
190-01182-00 Rev. B