Garmin GTR 225 Pilot's Manual page 21

Viewing a COM User Frequency
1. Press FUNC.
2. Turn the inner knob to USER FREQS.
3. Press ENT.
4. Turn the inner knob to cycle through COM user frequencies.
5. Press FLIP/FLOP to set the selected frequency as the active frequency.
Press ENT to set the selected frequency as the standby frequency.
Deleting a COM User Frequency
Active Frequency
1. Press FUNC.
2. Turn the inner knob to USER FREQS.
3. Press ENT.
4. Turn the inner knob to cycle through COM user frequencies.
5. Press CLR to delete the selected user frequency.
6. Press ENT to confirm deleting the selection.
Editing a COM User Frequency
1. Press FUNC.
2. Turn the inner knob to USER FREQS.
3. Press ENT.
4. Turn the inner knob to the COM user frequency to edit.
5. Press the inner knob to start editing the COM user frequency.
6. Turn the inner knob to select the MHz values.
7. Turn the outer knob to select the kHz field.
8. Turn the inner knob to select the kHz values.
9. Turn the outer knob to select the WPT field.
10. Turn the inner knob to select characters and turn the outer knob to move
the cursor.
190-01182-00 Rev. B
Deleting User COM Frequencies
COM User Frequency Selection
Garmin GTR 225/225A/225B Pilot's Guide
Position In List
Frequency
3-3