Epson TM-T88V-i User Manual page 96

96
2D-Code type
MaxiCode Mode 2
MaxiCode Mode 3
MaxiCode Mode 4
MaxiCode Mode 5
MaxiCode Mode 6
GS1 DataBar Stacked
GS1 DataBar Stacked 
Omnidirectional
GS1 DataBar Expanded Stacked
Aztec Code
DataMatrix
Description
Convert the character string to the string in UTF-
8, apply the escape sequence, and then
encode the string.
In Modes 2 and 3, when the first piece of data is
[)>\ x1e01\x1dyy (where yy is a two-digit num-
ber), this is processed as the message header,
and the subsequent data is processed as the
primary message. In other cases, from the first
piece of data, data is processed as the primary
message.
In Mode 2, specify the primary message in the
following format:
Postal code (1- to 9-digit number) GS:(\x1d) ISO
country code (1- to 3-digit number) GS:(\x1d)
Service class code (1- to 3-digit number)
In Mode 3, specify the primary message in the
following format:
Postal code (1 to 6 pieces of data convertible
by Code Set A) GS:(\x1d) ISO country code (1-
to 3-digit number) GS:(\x1d) Service class code
(1- to 3-digit number)
Convert the character string to the string in UTF-
8, apply the escape sequence, and then
encode the string.
Specify a 13-digit global trade item number
(GTIN) not including an application identifier
(AI) or a check digit.
Convert the character string to the string in UTF-
8, apply the escape sequence, and then
encode the string.
You can enclose an application identifier (AI) in
parentheses. The parentheses are used as HRI
print characters and are not encoded as data.
To encode each of the following characters,
specify two characters starting with the
character "{":
FNC1: {1
(: {(
): {)
After converting the character string to UTF-8,
conduct the escape sequence and encode.
After converting the character string to UTF-8,
conduct the escape sequence and encode.