Epson TM-T88V-i User Manual page 149

 Value of status
Constant (status)
ASB_NO_RESPONSE
ASB_PRINT_SUCCESS
ASB_DRAWER_KICK
ASB_BATTERY_OFFLINE
ASB_OFF_LINE
ASB_COVER_OPEN
ASB_PAPER_FEED
ASB_WAIT_ON_LINE
ASB_PANEL_SWITCH
ASB_MECHANICAL_ERR
ASB_AUTOCUTTER_ERR
ASB_UNRECOVER_ERR
ASB_AUTORECOVER_ERR
ASB_RECEIPT_NEAR_END
ASB_RECEIPT_END
ASB_BUZZER
ASB_WAIT_REMOVE_LABEL
ASB_NO_LABEL
ASB_SPOOLER_IS_STOPPED
No response from the TM printer
Printing is successfully completed
Status of the 3rd pin of the drawer kick-out connector = "H"
Battery offline status
(only for applicable devices) (in firmware Ver.2.2 and later)
Offline
The cover is open
Paper is being fed by a paper feed switch operation
Waiting to be brought back online
The paper feed switch is being pressed (ON)
A mechanical error occurred
An autocutter error occurred
An unrecoverable error occurred
An automatically recoverable error occurred
No paper in roll paper near end sensor
No paper in roll paper end sensor
A buzzer is on (only for applicable devices)
Waiting for label to be removed (only for applicable devices)
No paper in label peeling sensor (only for applicable devices)
The spooler has stopped (Not used)
Chapter 4 ePOS-Print API
Description
4
149