Epson TM-T88V-i User Manual page 234

Two-Dimensional Code
Ruled Line
Page Mode Default Area
Page Mode Maximum Area
Page Mode
Paper Cut
Specification of the paper feed
position for labels / black mark
paper
Drawer Kick-Out
Buzzer
Paper Layout Settings
Forced transmission mode
Recovery from an error
Reset
Command
Paper Layout
Paper type
width (sf)
height (sa)
margin_top (sb)
margin_bottom (se)
offset_cut (sc)
offset_label (sd)
234
PDF417, QR Code, MaxiCode, GS1 DataBar Stacked, GS1 DataBar
Stacked Omnidirectional, GS1 DataBar Expanded Stacked, Aztec
Code, DataMatrix
Not supported
576 dots x 1662 dots (W x H), 546 dots x 1662 dots (W x H) (42 column
mode)
576 dots x 1662 dots (W x H), 546 dots x 1662 dots (W x H) (42 column
mode)
Line
Supported (Only solid line)
Rectangle
Feed cut (Feeds paper to cutting position)
Supported (Only for black mark paper)
Not supported
Support (Pattern1 ~ Pattern 10, Stop)
Supported (Only for receipt paper)
Supported
Supported
Supported
Supported
Receipt paper
(without black mark)
800
0
0
0
0
0
Receipt 80 mm
Receipt paper
(with black mark)
800
0, 284 to 3100
-98 to 3100
0
-173 to 50
0