margin_top :
( Optional parameter, Object type : Number, When not specified : 0)
Specifies top margin (in units of 0.1mm).
margin_bottom :( Optional parameter, Object type : Number, When not specified : 0)
Specifies bottom margin (in units of 0.1mm).
offset_cut :
( Optional parameter, Object type : Number, When not specified : 0)
Specifies cut position (in units of 0.1mm).
In case of die cut label paper, it is a distance from the bottom of label.
When a paper has black mark, it is a distance from the beginning of black mark.
126
Paper Type
Receipt
(without black mark)
Receipt (with black mark)
Die-cut label
(without black mark)
Die-cut label
(with black mark)
Paper Type
Receipt
(without black mark)
Receipt (with black mark)
Die-cut label
(without black mark)
Die-cut label
(with black mark)
Paper Type
Receipt
(without black mark)
Receipt (with black mark)
Die-cut label
(without black mark)
Die-cut label
(with black mark)
Valid value range
0
Setup not necessary
Distance from the top of
-150 to 1500 *
black mark
Distance from the top of
0 to 1500 *
label
Distance from the bottom of
-15 to 1500 *
black mark
Valid value range
0
Setup not necessary
0
Distance from the bottom of
-15 to 0 *
label (paper feed direction
is a positive number)
Distance from the top of
black mark (paper feed
-15 to 15 *
direction is a positive num-
ber)
Valid value range
0
Setup not necessary
Distance from the top of
-290 to 50 *
black mark to the cutting
position
Distance from the bottom of
0 to 50 *
label to the cutting position
Distance from the top of
0 to 50 *
black mark to the cutting
position
Description
Description
Description