Network Setting Of Epos-Print Supported Tm Printer - Epson TM-T88V-i User Manual

Network Setting of ePOS-Print Supported TM printer

❏ TM-i
(p. 35)
❏ TM Printer for Wireless LAN Model
TM-i
Use TMNet WebConfig to configure the network settings such as IP address for the printer.
2
4
3
Configure the settings according to the following procedure:
1
Connect the printer to the network and turn the power ON.
2
Start the Web browser and type the URL of the TM-i interface into the address bar.
Enter the password.
http://[IP address of the TM intelligent printer]/PrinterConfigurationPage/
The initial value for the IP address of the TM‐i is a DHCP‐assigned address number.
(Firmware Ver.3.0 or later)
If an address fails to be assigned via DHCP, the value becomes ʺ192.168.192.168ʺ.
3
TMNet WebConfig starts.
Select as [Configuration] - [Wired / Wireless] - [TCP/IP].
4
The "TCP/IP Setting" screen appears. 
Configure the network settings for the TM-i and click [Submit].
5
Print the status sheet using the TM-i to check that the IP address has been
updated.
(p. 36)
Chapter 2 Sample Program
35
2