Installing The Fron Panel Tray; Figure 108. Sliding The Front Panel Tray Out From The Chassis; Figure 109. Disconnecting The Cables From Front Panel Board - Intel S2600CP Service Manual

Hardware Installations and Upgrades
9. Slide the front panel out from the front of the chassis to the place (see Letter "C") so that
you can reach the front panel cable and instrustion cable connectors at the rear of the front
panel. Then disconnect the front panel cable and intrusion switch cable from the front panel
board (see Letter "D").
10. Slide the front panel tray out.

Installing the Fron Panel Tray

1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover".
4. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel".
5. Remove the airduct if it is installed.
6. Attach the front panel cable and the chassis intrusion cable (see Letter "A") to the front panel
board.
66 Intel

Figure 108. Sliding the Front Panel Tray out from the Chassis

Figure 109. Disconnecting the Cables from Front Panel Board

®
Server Board S2600CP Family Intel
®
Server System P4000CP Family Service Guide