Panasonic SC-HT744 Operating Instructions Manual page 12

Dvd home theater sound system
Hide thumbs Also See for SC-HT744:
Table of Contents

Advertisement

Available languages

Available languages

5
STEP
AM loop antenna
≥ Connect the AC power supply cord after all other connections are complete.
≥ Using an outdoor antenna (optional) (➜ page 29).
AM loop antenna
Stand the antenna up on its base.
Place the antenna where reception is best.
Keep loose antenna cable away from other wires
and cables.
AC power supply cord
To household AC outlet
(AC 120 V, 60 Hz)
Conserving power
The main unit consumes a small amount of power, even when it is turned off (approx. 0.4 W). To save power when the unit is not to be used for a long
time, unplug it from the household AC outlet.
You will need to reset some memory items after plugging in the unit.
[Note]
The included AC power supply cord is for use with this unit only. Do not use it with other equipment. Also, do not use cords for other equipment with
this unit.
6
STEP
Remote control
Insert so the poles (i and j) match those in the remote control.
R6/LR6, AA
Replace the cover.
12
Radio and AC cord connections
Main unit
AC IN
AC IN
Black
Preparing the remote control
Batteries
Press in and lift up.
≥ Do not use rechargeable
type batteries.
FM indoor antenna
Click!
Loosen the terminal screw with
a Phillips-head screwdriver.
White
Red
While pushing, insert the wire fully.
Do not:
≥ mix old and new batteries.
≥ use different types at the same time.
≥ heat or expose to flame.
≥ take apart or short circuit.
≥ attempt to recharge alkaline or manganese batteries.
≥ use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
∫ Use
Aim at the display (➜ page 13), avoiding obstacles, at a maximum
range of 7 m (23 feet) directly in front of the unit.
AC power supply cord
FM indoor antenna
Affix this end of the
antenna where
reception is best.
Adhesive tape
LOOP
ANT GND
FM ANT
75 75
LOOP
AM
ANT
EXT
Re-tighten the terminal
screw.

Advertisement

Table of Contents
loading

Table of Contents