Advertisement
Model and Serial Number Information
If you have any questions about our products please have the
catalogue/model and serial numbers available upon calling customer
service. To locate the catalogue/model and serial number labels see
below
(Figure 1).
Figure 1
Installation
!
NOTE: A 15 Amp, 120 Volt circuit is required. A dedicated circuit
is preferred but not essential in all cases. A dedicated circuit will
be required if, after installation, the circuit breaker trips or fuse
blows on a regular basis when the heater is operating. Additional
appliances on the same circuit may exceed the current rating of the
circuit breaker.
WARNING: Ensure the power cord is not installed so that it is
pinched or against a sharp edge and ensure that the power cord is
stored or secured to avoid tripping or snagging to reduce the risk of
fire, electric shock or injury to persons.
Construction and electrical outlet wiring must comply with local
Model Number
Serial Number
Rating Label
6
Advertisement
