Model And Serial Number Information; Site Selection And Preparation - Dimplex DF2603 Owner's Manual

Model and Serial Number Information

If you have any questions about our products please have the product
model and serial numbers available upon calling Dimplex customer
service. To locate the model and serial number see below (Figure 1).
Figure 1

Site Selection and Preparation

This section provides easy step by step instructions for selecting a
location and preparing the site to install the fireplace into:
• Existing fireplace
• New wall construction
• Dimplex mantel surround kit or custom made mantel surround
! NOTE:
The fireplace insert comes completely assembled and
wired. Some tools may be required to prepare the site and
assembly/install the trim.
The dimensions of the fireplace insert are 26 inches (66 cm) wide X
22 ½ inches (57.2 cm) high X 12 inches (30.5 cm) deep (Figure 2).
You should allow ¼ inch (0.6 cm) around the fireplace insert for
ease of installation.
This fireplace does not require any venting.
Model Number
SERIAL No.
XXX
Serial Number
6
Part Number
XX