Sound Controls - Magnadyne M1-LCD Operation And Installation Manual

Sound Controls

Volume:
Increase the volume by pressing the + side of
the button.
Decrease the volume by pressing the - side of
the button.
Note: See Startup Volume (page 7) on how to
adjust the initial startup volume level.
Bass, Treble, Balance and Fader Controls:
To access the Bass, Treble, Balance and Fader
buttons, press the SETTINGS button in the home
row then press the SOUND button.
Touch the button to activate the desired adjust-
ment control. When the item is selected the but-
ton will become highlighted. Press the - button
to decrease the output and press the + button to
increase the output of Bass and Treble. The yel-
low bar will move to indicate the adjustment.
The highlighted bar in the middle of the scale
indicates a neutral position.
Note 1: Balance button adjusts the amount of
sound output to the left and right speakers.
Note 2: Fader button adjusts the amount of
sound output to the front and rear speakers.
Equalizer (EQ):
To access the EQ button, press the SETTINGS
button in the home row then press the SOUND
button.
Touch the EQ button to choose between the pre-
set equalizer settings: DSP OFF, FLAT, CLAS-
SICS, POP M, ROCK M and JAZZ as indicated in
the display area.
Note: "DSP OFF" setting reverts Bass and Treble
back to the last manually adjusted settings.
Increase
Decrease
Volume Level Indicators
Equalizer Setting
11