Installation - Magnadyne M1-LCD Operation And Installation Manual

Installation

Step 1
: The radio chassis is designed to be "Sleeve Mounted" through an opening in the dashboard panel.
The required opening size is 182mm (7-3/16") x 84mm (3-5/16"). Cut or engage an opening in the
dashboard to accommodate the mounting sleeve.
Step 2
: Insert the mounting sleeve into the opening in the dashboard. Bend the metal tabs on the sleeve
to secure the mounting sleeve to the dashboard.
Step 3
: Bring all wiring for the connection of the unit (including the antenna) through the center of the
mounting sleeve.
Sheet Metal
Screw
Nut
Washer
Metal Strap
Dashboard
Removing the Unit:
To remove the radio after installation, insert the removal keys straight back until they click. Then pull the
radio out.
Note: If the removal keys are inserted at an angle they will not release the radio.
Mounting Sleeve
Insert Removal
Keys Here
Insert Removal
Keys Here
41