Record Configuration; Enable; Record Bitrate - Genie WHDSDI16 User Manual

Table of Contents

Advertisement

Record Configuration

4.3
Record configuration includes six sub menus: enable, record bit rate, time, recycle record, stamp and snap.

4.3.1 Enable

Step1: Enter into MenuSetupRecordEnable tab. Refer to Fig 4-9:
Fig 4-9 Record Configuration-Enable
Step2: Checkmark record and audio.
Step3: Select All to setup the same settings for all channels.

4.3.2 Record Bitrate

Step1: Enter into MenuSetupRecordRecord Bitrate tab. Refer to Fig 4-9:
Step2: Setup rate, resolution, quality, encode and max bit stream
Step3: Select "All" to set same settings for all channels.
Step4: Click "Default" button to restore default setting; click "Apply" button to save the setting; click "Exit" button to exit the current
interface.
DVR User Manual
Parameter
To enable/disable recording for
Record
the channel
To enable/disable audio recording
Audio
for the channel
23
Meaning

Advertisement

Table of Contents
loading

Table of Contents