Blocking The Delivery Of Beverages; Changing The Beverage Strength (Coffee, Decaf, Tea And Cocoa) (Not For Milk) - Douwe Egberts CAFITESSE 500 Service Manual

Service Manual Cafitesse 500

4.2.7 Blocking the Delivery of Beverages

Turn the key switch to position 2.
The display will indicate the present
adjustment 'bloc' or 'No bl'. (Fig. 1)
'bloc' = Delivery is blocked.
Dispenser remains switched on.
'No bl' = Delivery of beverages enabled.
Changing the adjustment:
Actuating button (2) = + or (3) = –
(Fig. 1)
To finish programming, turn the key switch
to the neutral position and remove the key.
4.2.8 Changing the Beverage Strength (Coffee, Decaf, Tea and Cocoa)
(not for Milk)
(if the function has been programmed by the
service technician).
(ratio = water-concentrate relation)
Turn the key switch to position 2 =
programming position. (Fig. 1)
Display: "RATIO". Press the corresponding
delivery button and the value for this
button will be displayed.
Example:
L1 20 = 1. First button on the left side =
set ratio = 1:20
For the numbering of the buttons see
fig. 2.
To change the adjustment:
Press the button (2) = + or (3) = -
The beverage strength can be changed by
±5 % (not possible for lactiferous
beverages).
The beverage strength can be changed
individually for each delivery button.
If you want to change the beverage
strength by more than ±5 %, call a service
technician.
To finish programming, turn the key switch
to the neutral position and remove the key.
4 - 28
A
B
Fig. 1
2
Fig. 1
empty low temperature
L1
stop
L2
BREWING
L3
hot water
Fig. 2
Programming
Position 2
2 3
3 Position 2
empty
R1
R2
R3
January 2001