Operation; Putting Into Operation; Switching The Dispenser Off; Delivery Of Beverages - Douwe Egberts Cafitesse 700 Operator's Manual

Operation

k
M i l
f f e e
C o
3

Delivery of beverages

with pre-selection options
Please make your selection
small medium
10
1
T e a
2
large
12
OPERATION

PUTTING INTO OPERATION

• Open the water tap and plug in the mains plug.
• Wait until the correct ingredient storage
temperature is reached. The display indicates a
corresponding message.
• Insert the product packs (1). Please observe the
product stickers (2) when doing so (fig. 9).
9
Mark the date on the pack.
The stickers at the panel indicate which
product pack (BIB) must be inserted at
which position.
A corresponding message is indicated on
the display when the water temperature in
the boiler is not correct if this function has
been programmed. The message is
cleared as soon as the correct temperature
is reached.
• If the dispenser has been out of operation for a
10
very long time period (e.g. during works
holidays), put a collecting vessel underneath the
hot water outlet, actuate a hot water delivery
button (3) and let at least 10 l of hot water flow
out before using the dispenser (fig.10).
4

SWITCHING THE DISPENSER OFF

• If the dispenser is not to be used for a shorter
period of time (e.g. over the weekend), use the
ON/STANDBY/CLEAR switch (4) to activate the
STANDBY mode (fig. 11).
11 As a result, the power supply is not completely
interrupted. The product packs continue to be
sufficiently cooled in the ingredient storage unit.
• If the dispenser will not be used for a very long
time period (e.g. during works holidays), unplug
the mains plug, close the water tap, remove the
product packs (BIB) and store them in a
refrigerator depending on the 'best before date'.
02.2010