Operation; Control Panel Operation; Menu Map; Dmx Linking - Chauvet SlimBEAM QUAD IRC User Manual

4. O
PERATION
Control Panel

Operation

Menu Map

DMX Linking

Configuration
(DMX)
DMX Personality
and Starting
Address
SlimBEAM™ QUAD IRC User Manual Rev. 1
To access the control panel functions, use the four buttons located underneath the display.
Please refer to the Product Overview
Button
Press to find an operation mode or to back out of the current menu
<MENU>
option
<UP>
Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<ENTER>
Press to activate a menu option or a selected value
Mode Programming Steps
4-CH
DMX Mode 9-CH
16CH
Static Color Mode C--
Auto Program Mode P--
Program Speed S--
Sound-Active Mode
Sound Sensitivity SenS
Custom Color Mixing
U--
Mode
Dimmer dIN
Infrared Mode SET
The SlimBEAM™ QUAD IRC works with a DMX controller. Information about DMX is in the
CHAUVET® DMX Primer,
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels the
selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The SlimBEAM™ QUAD IRC uses up to 16 DMX channels, which defines the highest
configurable address to 497.
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until 4-CH, 9-CH, or 16CH shows on the display.
2. Press <ENTER> when the desired personality is selected, and d 1–d512 will show on
the display.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
to see the button locations on the control panel.
Function
Selects the DMX Personality and the DMX
d 1–d512
starting address
C 1–C 15 Selects 1 of 15 static colors
Selects 1 of 10 auto program
P 1–P 10
S 1–S100 Sets auto program speed (slow to fast)
Selects Sound-Active mode
Snd
u 0–u100 Sets the sound sensitivity
Red (0–100%)
r 0–r255
g 0–g255 Green (0–100%)
b 0–b255 Blue (0–100%)
A 0–A255 Amber (0–100%)
No dimming curve
OFF
dIN1 Fast dimming curve
dIN2 Medium dimming curve
dIN3 Slow dimming curve
ON
Turns infrared on or off
OFF
which is available
Description
from the Chauvet website
Page 9 of 19