Icom ID-5100E Basic Manual page 82

7
MENU SCREEN
Menu items and Default settings (Continued)
■
RX Treble
RX Bass Boost
TX Bass
TX Treble
Auto Reply
DV Data TX
DV Fast Data
Fast Data
GPS Data Speed
TX Delay (PTT)
Digital Monitor
Digital Repeater Set
DV Auto Detect
69
Cut, Normal or Boost
OFF or ON
Cut, Normal or Boost
Cut, Normal or Boost
OFF, ON, Voice, Position (Main Only)
or Position (Main/Sub)
PTT or Auto
OFF or ON
Slow or Fast
1sec~2sec~10sec or OFF
Auto, Digital or Analog
OFF or ON
OFF or ON
Sets the DV mode received audio treble filter level to
Cut, Normal or Boost.
Turns the DV mode received audio Bass Boost func-
tion ON or OFF
Sets the DV mode transmit audio bass filter level to
Cut, Normal or Boost.
Sets the DV mode transmit audio treble filter level to
Cut, Normal or Boost.
Selects the Automatic Reply function.
Selects manually or automatically to transmit low
speed data.
The DV Fast Data function uses the data and the au-
dio frames to send data approximately 3.5 times faster
than the normal speed. So, no audio can be sent.
Selects whether or not to use DV Fast data function
for data communication in the DV mode.
Set the GPS data speed when the data is sent using
the DV Fast Data function.
Set the TX delay time after releasing [PTT] when the
"DV Data TX" item is set to "PTT" and data is sent
using the DV Fast data function.
Selects the DV mode RX monitoring when [SQL] is
held down.
Turns the digital repeater setting function ON or OFF.
This function is usable in any DV mode except using
the DR function.
Turns the DV mode automatic detect function ON or
OFF.