Mounting; Orientation; Rigging - Chauvet Hurricane 1600 User Manual

Mounting

Orientation

Rigging

Mounting Diagram
Page 8 of 16
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
This product may NOT be tilted. This product should be level when on a surface
or when mounted.
·
Before deciding on a location, always make sure there is easy access to the product
for maintenance and fluid replenishment.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight (see the
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, such as an elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has 13-mm holes, which are appropriate
for this purpose.
·
The rubber feet also serve as floor supports and allow for surface mounting. When
mounting the product on the floor, make sure that the product and cables are away
from people and vehicles.
Safety Cable
(works with CH-05 from
Chauvet)
Nozzle
While operating the Hurricane™ 1600, make sure there is adequate fog fluid in the
machine to prevent pump and heater damage. When the fog fluid level becomes
low, simply add more fog fluid to continue using the Hurricane™ 1600.
Technical Specifications).
Mounting Clamp
(such as CLP-15 or
CLP-15N clamp from
Chauvet)
Mounting
Bracket
Bracket Adjustment Knob
Hurricane™ 1600 User Manual Rev. 1