Troubleshooting - Vax HF86-FM-T Floormate Trio Getting Started User Manual

What to do if it goes wrong
Problem Solution
• Check the fuse in the plug. Always replace the fuse in the
plug with a British 13amp fuse.
Why won't my
Floormate switch on?
• Empty recovery tank, remove any debris from filter.
If washing filter allow 24 hours to fully dry before refitting.
• The recovery tank has an automatic shut off to prevent the
Why won't my
tank from overflowing. If this is activated, the machine will
Floormate pick up?
not pick up and the sound of the motor will change.
The recovery tank will need to be emptied.
• Ensure recovery tank is locked into place.
• The nozzle may be blocked go to 'Taking care of
your machine'.
• Clean water tank may not be locked in position.
Why won't the water/
• Clean water tank may be empty and need to be refilled.
solution dispense?
• Mode selector switch is set to PICK UP, change to WASH.
• Check the brushes for blockages and clear.
Why won't the brushes
spin?
Warning: Always unplug the Floormate before performing maintenance/troubleshooting checks.
* Calls are charged at the UK local rate. Please make a note of the serial number and model number of the hard floor cleaner before calling.
Getting in touch