Preparation; Filling The Clean Water Tank; Getting Started - Vax HF86-FM-T Floormate Trio Getting Started User Manual

Getting started

PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE
Raise handle to upright To lower handle, press
position until it locks handle release button
into place and fold handle to
storage position
Push brushes firmly at Remove any packaging from the
both ends until it locks nozzle and ensure latches are
into place out, insert nozzle into middle
section of the base
To install brushes rest the machine on the
floor. Align the post on the spin brushes
with the square hole
While holding nozzle in
place, slide latches inward
to lock it into position
Before you begin cleaning
Please remove any large objects or debris prior to using your Floormate Trio.
IMPORTANT: Only use Vax hard floors cleaning solution. Using other solutions may cause excess foaming.
Excessive foam will prevent the machine from working effectively. Using other solutions will invalidate the guarantee.

Filling the clean water tank

To remove the clean water Twist tank cap counter
tank, squeeze release button clockwise and lift to remove
and pull tank straight out
Lock tank cap into place to Slide tank into machine until
prevent leaking latch snaps into position
Using your machine
Using the tank cap as Pour cleaning solution
a measuring cup, pour into tank. Top up tank to
the required amount of fill line with warm water
solution (approx. 60ml per (Max 40°C)
1 litre of water)
WARNING
Always switch the
machine off and unplug
before carrying out any
maintenance.