Using Your Machine; Emptying The Recovery Tank - Vax HF86-FM-T Floormate Trio Getting Started User Manual

Using your machine

Note: The recovery tank has an automatic shut off to prevent the tank from
overflowing. If this is activated, the machine will not pick up and the sound of the
motor will change. The recovery tank will need to be emptied.

Emptying the recovery tank

To remove recovery tank, Remove recovery tank lid
press down on release to empty
button and pull
Using your machine
Push switch to turn machine Step on release pedal to
on, push switch again to turn recline machine
machine off
TIP
We recommend that the
recovery tank is emptied
after dry pick up and
before wet operation.
To move your machine from
room to room, put the handle
in the upright position and tilt
machine back on rear wheels
Using your machine
The machine can also be The mode selector allows you to choose
moved by lifting the machine DRY VAC, WASH or WET PICKUP. For dry
using the carry handle on debris pick up turn the dial to DRY VAC,
the front the brushes will not rotate
To wash hard floors turn
In WASH mode slowly move the
the dial to WASH, brushes machine forward to arms length
will automatically rotate. For squeezing the trigger to release
spills/wet pickup turn the dial the solution. Release trigger and
to WET PICKUP, the brushes pull back machine to pick up
will not rotate
Using your machine
TIP
Brushes will only rotate
in WASH mode.