Taking Care Of Your Machine; Cleaning The Nozzle; Cleaning The Brushes - Vax HF86-FM-T Floormate Trio Getting Started User Manual

Taking care of your machine

The clean water tank contains a washable filter. Clean this filter
when suction is low. Pull open the filter lid gently to remove the
filter for cleaning
Make sure the filter screen is
Place dry filter back into lid,
wiped clean to remove any replace lid and press down
dirt/debris firmly until snapped in place
40˚C 40˚C
MAX MAX
Rinse under water to remove
debris (max. 40°C) and leave
for at least 24 hours or until
fully dry before replacing in
the machine
To replace the recovery tank, align
bottom of recovery tank behind
ledge and push firmly until clicks
into place
Taking care of your machine

Cleaning the nozzle

Nozzle can be removed Remove nozzle by pulling
for easy cleaning. Slide straight out and rinse under
the two nozzle release running water (max. 40°C)
latches outwards

Cleaning the brushes

Push both brush release To replace brushes, align the
buttons and remove the post with square hole on the
brush assembly. Brushes bottom of the machine. Push
can be rinsed under water brushes firmly at both ends
to remove debris (Max 40°C) until it locks into place
Warning: Always remove the tanks before carrying out brush/nozzle maintenance.
Remove any debris from
squeegee by wiping with
a damp cloth
To replace nozzle ensure
latches are in the out position,
insert nozzle into middle sec-
tion of base. While holding the
nozzle in place, slide latches
inward to lock into place