Makita DF330D Instruction Manual
Cordless driver drill
Hide thumbs
Also See for DF330D:
- Instruction manual (60 pages) ,
- Technical information (6 pages) ,
- Instruction manual (53 pages)
Related Manuals for Makita DF330D
Summary of Contents for Makita DF330D
- Page 1 INSTRUCTION MANUAL Cordless Driver Drill DF330D 009329 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model DF330D Steel 10 mm Wood 21 mm Capacities Wood screw 5.1 mm x 63 mm Machine screw High (2) 0 - 1,300 No load speed (min Low (1) 0 - 350 Chuck capacity 0.8 mm - 10 mm... -
Page 3: General Power Tool Safety Warnings
EC Declaration of Conformity refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Makita declares that the following Machine(s): Do not expose power tools to rain or wet Designation of Machine: conditions. Water entering a power tool will Cordless Driver Drill increase the risk of electric shock. - Page 4 Power tool use and care Service 17. Do not force the power tool. Use the correct 28. Have your power tool serviced by a qualified power tool for your application. The correct repair person using only identical power tool will do the job better and safer at the replacement parts.
-
Page 5: Functional Description
ENC009-1 FUNCTIONAL DESCRIPTION IMPORTANT SAFETY INSTRUCTIONS CAUTION: Always be sure that the tool is switched off and the • FOR BATTERY CARTRIDGE battery cartridge is removed before adjusting or Before using battery cartridge, read all checking function on the tool. instructions and cautionary markings on (1) Installing or removing battery cartridge battery charger, (2) battery, and (3) product... - Page 6 switch trigger again to restart. Reversing switch action Low battery voltage: • The remaining battery capacity is too low 1. Reversing and the tool will not operate. If you pull the switch lever switch trigger, the motor runs again but stops soon.
-
Page 7: Drilling Operation
Adjusting the fastening torque OPERATION 1. Pointer CAUTION: 2. Adjusting ring 3. Graduation Always insert the battery cartridge all the way until • it locks in place. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. -
Page 8: Using Holster
Drilling in wood Using holster When drilling in wood, the best results are obtained with wood drills equipped with a guide screw. The guide CAUTION: screw makes drilling easier by pulling the bit into the Do not use for tools such as a drill with a bit •... -
Page 9: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Drill bits • Screw bits • Socket bits •... - Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 884867D228...