How To Set The Oven Controls - Magic Chef MCD990STG Owner's Manual

NUMBER PADS(0-9)
Touch to set times or amounts.
CLOCK
Touch to set the clock.
STOP/CLEAR

HOW TO SET THE OVEN CONTROLS

HOW TO SET THE OVEN CONTROLS
HOW TO SET THE OVEN CONTROLS HOW TO SET THE OVEN CONTROLS
BEEPS DURING OVEN SETTINGS
ONE BEEP: Oven accepts the entry.
♦
TWO BEEPS: Oven does not accept the entry. Please check and try again.
♦
SETTING THE CLOCK
When the oven is first plugged in, the display will briefly show "ENTER CLOCK TIME",
you can set the clock time now or later. To set the clock time later,
1. Press CLOCK pad.
CLOCK
2. Use the numeric pads (in the
natural sequence of time) to enter
clock time.
3. Press CLOCK to confirm.
MICROWAVE COOKING
A. One-stage Cooking
Press number pads to enter cooking
1.
time until the correct cooking time is
displayed.
2. Press POWER pad.
POWER
(Select the desired power level by
touch the numeric pads.)
3. Press START pad.
Touch to stop cooking program or clear
all previous settings before cooking
starts
START
Press to start cooking.
NOTE: The clock works in 12-hour
cycle.
The display stops blinking, and the
colon starts blinking. This digital clock
allows you to set from 1:00 to 12:59.
The display will show entered cooking
time.
The "COOK" indicator lights
The display will show the entered
power level.
NOTE: If steps 2 is omitted, the
oven will cook at full power.
NOTE: You oven can be
programmed for 99 minutes
99 seconds. (99:99)
10