Saving The Song - Korg PA4X Quick Start Manual

116| Quick Recording a Backing Sequence Song
Recording
Turn on the metronome
▪
Press the METRO
ing. The metronome click will not be recorded with the Song.
Record
1 Select the Style Element you want to use before starting to play. Select any
of the Variations before starting to record. Select one of the Intros to start
with an introduction.
2 Press the START/STOP
A 1-measure precount
it begins, record freely.
3 Play as if you were performing live with the Styles.
During recording, select any Style Element (Intro, Variation, Fill, Break,
Ending...) you like. While recording in Backing Sequence Record mode, you
cannot use the Synchro, Tap Tempo, Balance controls.
4 When finished recording your Song, press the
recording, and return to the main page of the
5 While in the main page of the Sequencer mode, press the
button to listen to the recorded Song.

Saving the Song

When finished recording the new Song, go to the
mode and choose the
Song. The Save Song
Current path
Storage device
This window is very similar to the
that can only see MIDI Song files (.mid).
( ) button to turn the metronome on or off while record-
button to start recording.
will play before the recording actually begins. When
Save Song command from the page menu to save the
window will appear.
Media > Save
START/STOP button to exit
Sequencer mode.
PLAY/STOP (
main page of the
page. Files are filtered, so
)
Sequencer