Connecting The Base; Connecting The Power Cable To The Base; Connecting The Base To The Mains Power Supply - Gigaset N510 IP PRO User Manual

Connecting the base

Connecting the base
Please note
Your Gigaset N510 IP PRO is supplied with sufficient power via PoE (Power over Ethernet)
if the device is connected to an Ethernet switch with PoE functionality (PoE class
IEEE802.3af ). In this case, it is not necessary to connect the device to the mains power
supply.

Connecting the power cable to the base

Connecting the base to the mains power supply

§§1§§
Insert the power adapter into
the mains socket.
Note: If you do not use PoE, the
power adapter must be plugged
in at all times for operation, as
the phone does not work without
a mains connection.
6
1
2
§§1§§
Insert the power cable of the power
adapter into the connection socket
at the rear of the base.
§§2§§
Insert the cable into the cable recess
provided.
Warning:
Use only the power adapter supplied.
1