Operation; Programming The Immobilizer System - PIAGGIO X9 Evolution 500 User Manual

Operation

Every time the starter key is removed in the "OFF" or "LOCK" position, the safety
system activates the immobilizer system. Turning the key to "ON" disables the engine
lock, provided that the safety system recognises the code transmitted by the key. If
the code is not recognised, turn the key first to "OFF" and then to "ON"; if the lock
cannot be disabled, try with the other key supplied (red-coloured). If the engine cannot
be started, contact an authorised Piaggio service centre, which is provided with the
electronic equipment required to detect and repair the system. The immobiliser is ac-
tivated even when the engine is switched off with the engine cut-off switch. This
happens even if the starter key is in position "ON". When additional keys are required,
please note that data storage (up to 7 keys max.) must be done on all keys, both new
ones and existing ones. Take the key with the red grip and all the black keys supplied
to an authorised Piaggio service centre. The codes of keys not submitted for the
new storage procedure are deleted from the memory. Any lost keys will therefore not
be enabled to start the engine.
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED BY
THE SYSTEM CONTROL UNIT.
VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE
KEY.
IF OWNERSHIP OF THE VEHICLE IS TRANSFERRED, THE RED-HANDGRIP KEY
(AS WELL AS THE OTHER KEYS) AND THE "CODE CARD" MUST ALSO BE
TRANSFERRED TO THE NEW OWNER.

Programming the immobilizer system

The procedure for programming the «PIAGGIO IMMOBILIZER» system and/or for
storing other key codes is described below.
21