Operation - PIAGGIO Vespa GTS 300 HPE 2019 Owner's Manual

Activation of the "PIAGGIO IMMOBILIZER" system is signalled by a flashing «A»
indicator. In order to reduce battery discharge, the indicator LED turns off automatically
after 48 hours of uninterrupted functioning. If there is a fault in the system, the indi-
cation led tells the Authorised Service Centre what the type of fault is through the
type of flashing emitted.
01_23

Operation

Each time the ignition key is removed while in the "CLOSE" or "LOCK" position, the
protection system engages the immobiliser. Turning the key to "ON" disables the en-
gine lock, provided that the protection system recognises the code transmitted by the
key. If the code is not recognised, turn the key first to "OFF" and then to "ON"; if the
lock cannot be disabled, try with the other key supplied (brown). If the engine still
cannot be started, an Authorised Piaggio Service Centre with the electronic equip-
ment necessary to identify the problem and repair the system must be contacted.
When requesting additional keys, remember that the registration (up to a maximum
of 3 keys) must be performed for all the keys, including the news ones and those
already in your possession. Take the key with the brown grip and all the blue keys
supplied to an Authorised Piaggio Service Centre. The codes of keys not submitted
for the new programming procedure are deleted from the memory. Any lost keys will
therefore not be enabled to start the engine.
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED IN
THE SYSTEM CONTROL UNIT MEMORY.
27