Installing The Microphone/Earphone - PIAGGIO X9 Evolution 500 User Manual

STARTING (USING THE VEHICLE KEY)
Specification= Condition - Displaying; Desc./Quantity= Available
functions
No helmet inserted - Logo X9

Installing the microphone/earphone (02_17)

The microphone must be attached to the lower left edge of the helmet with the metal
clip «O». The ear phone «J» must be positioned at the height of the left ear using
velcro «N». For the best intercom quality:
- for full helmets bend the rod so that the microphone is completely inside the chin
piece of the helmet with the white point (PB) turned towards your mouth;
- for Jet helmets bend the rod so that the microphone is as close as possible to your
mouth, with the white point (PB) turned towards your mouth
02_17
WARNING
IMPORTANT: do not remove the foam rubber protection from the microphone.
The wire that connects the microphone/earphone kit must be connected for the
driver to the front connector on the vehicle and to the rear connector for the
passenger.
N.B.
N.B.: The Piaggio helmet equipped for the PICS system integrates:
- a microphone through a larynx phone inserted in the fastening belt padding;
- an earphone inside the helmet near the left ear. To connect the system. insert
the supplied wire into the jack on the lower edge of the helmet.
Tuner - source - Speakerphone
with external speakers
49