Fiat 500 User Manual page 45

• On your mobile phone, search for devices equipped with Bluetooth® wireless
technology (the setting on your mobile phone might be called Discover or New
Device). In this list you will find BLUE&ME™ (name identifying the BLUE&ME™
system on your car): select it.
• When prompted by the mobile phone, enter the PIN number shown on the instru-
ment panel display using your mobile phone keypad. If pairing is successful, the system
will say "Connecting" and at the end the display will show as confirmation message,
the ID of the paired mobile phone.
• It is essential to wait until you see this confirmation message on the display. Pressing
PHONE/MENU button on the steering wheel or MUTE/ESC button before the mes-
sage is displayed may cancel the pairing process. If the pairing process fails, an error
message will be displayed: in this event repeat the pairing procedure.
• At first pairing, BLUE&ME™ will say "Welcome" immediately after connecting. This
message will no longer be heard when your phone automatically connects to the
BLUE&ME™ system on future ignition cycles.
• BLUE&ME™ will ask if you would like to copy your paired phone phonebook to
BLUE&ME™. It is recommended to copy it. To start copying the phonebook say
"Yes, " otherwise say "No."
• For certain mobile phones the phonebook is not copied automatically, in this case you
must transfer the phonebook contacts using your mobile phone keypad. If BLUE&ME™
asks you to do this, then perform this procedure following the instructions specific to your
mobile phone and press the PHONE/MENU button on the steering wheel when you
have finished. Certain mobile phones may require you to indicate that you do not want to
be asked every time to copy the phonebook. If this is the case, this could be indicated by
checking a box on the phone during the pairing process. If applicable, this option will only
be presented on the phone during the pairing process.
Making A Phone Call
• Assume that "John Smith" is one of the contacts stored in your phonebook. To call
John Smith, proceed as follows:
1. Press the VR steering wheel button and pronounce "Call John Smith." If the name is
recognized, the system will display the recognized contact' s information on the display
screen.
2. If there is just one phone number for John Smith in your phonebook, the system will
ask if you would like to call John Smith. To start the call say "Yes, " otherwise say "No."
If John Smith has several phone numbers, the system will ask which phone number
you would like to call (e.g.: "Call John Smith (at) Work or (at) Home?"). Answer with
the type of required phone number (e.g.: "(at) Home").
3. If John Smith has several phone numbers but the "location" (e.g.: the type of phone
number like work, home, etc.) is missing, the system will display the selected contact and
a list of related phone numbers on the instrument cluster display. The hands-free phone
system will ask if you would like to call the phone number displayed. To respond with
"Yes, " pronounce "Yes, " otherwise say "No." If this is the correct contact but the wrong
ELECTRONICS
43