Operating Your Vehicle; Engine Break-In Recommendations - Fiat 500 User Manual

Hide thumbs Also See for 500:
Table of Contents

Advertisement

ENGINE BREAK-IN RECOMMENDATIONS

A long break-in period is not required for the engine and drivetrain (transmission and
axle) in your vehicle.
Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km),
speeds up to 50 or 55 mph (80 or 90 km/h) are desirable.
While cruising, brief full-throttle acceleration within the limits of local traffic laws
contributes to a good break-in. Wide-open throttle acceleration in low gear can be
detrimental and should be avoided.
The engine oil installed in the engine at the factory is a high-quality energy conserving
type lubricant. Oil changes should be consistent with anticipated climate conditions
under which vehicle operations will occur. For the recommended viscosity and quality
grades, refer to "Maintaining Your Vehicle."
NOTE:
A new engine may consume some oil during its first few thousand miles (kilometers) of
operation. This should be considered a normal part of the break-in and not interpreted
as an indication of an engine problem or malfunction.
Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may
result.

OPERATING YOUR VEHICLE

CAUTION!
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

500c

Table of Contents