Magellan MAP 330M Frequently Asked Questions Manual page 8

Answer:
Product:
Question:
62
Map330,
Map330M
Answer:
Product:
Question:
63
Map330,
Map330M
Answer:
Product:
Question:
64
Map330,
Map330M
Answer:
Product:
Question:
66
Map330,
Map330M
Answer:
Product:
Question:
67
Map330,
Map330M
Answer:
Product:
Question:
69
Map330,
Map330M
Answer:
Product:
Question:
70
Map330,
Map330M
Answer:
Product:
Question:
71
Map330,
Map330M
Answer:
Excessive static electricity Is a common cause for this problem. Turn
the receiver back on and it should operate normally. Move the
receiver to a new location to avoid a similar occurrence.
Battery life seems shorter than it should be. What can I do?
Make sure that you are using two AA alkaline batteries.Shorter life
span of the batteries can be due to excessive use of the backlight.
Turn the backlight off when not needed.
Why do the position coordinates on my receiver not match the
location on my
map.
Make sure that your receiver is set up to use the same datum as
your map. The map datum is generally shown in the map legend.
2. Check your latitude/longitude format. Make sure that the format
selected in coordinate system (DEG/MIN/SEC or DEG/MIN.MM) is in
the same format as the map you are using.
Why is the position on a map not exactly the position on a road?
This could be caused by distance shifts to the map. Use map data
for reference, but do not rely completely on it.
What is the temperature range in my MAP 330 and MAP 330M?
Operating 14˚F to 140˚F to (-10˚C to 60˚C)
Storage -4˚F to 158˚F (-20˚C to 70˚C)
What is the function of the MapSend Street in my MAP 330??
The MapSend Streets CD allows you to load detailed street maps
into your MAP 330. The maps supplied on the MapSend Streets CD
contain full street detail of US cities.
How do I check the trip odometer in my MAP 330 and MAP 330M?
Press the nav button to get the position screen. At the bottom of the
page you can get the trip odometer.
What is the difference between MAP 330 and MAP 330M?
MAP 330M has fixed nvaids which include buoys, lighthouses,
Marinas, and obstructions (wrecks, rocks, and so forth.). These
navaids can
be accessed through the database in the same manner that any
other waypoint or map object can be accessed using the database
function.
Where is GOTO route stored?
GOTO routes are NOT saved in memory when the MAP 330 is
turned off. If you are navigating on a GOTO route and you need to
turn the MAP 330 off, you will need to restart the GOTO. Routes,