Magellan MAP 330M Frequently Asked Questions Manual page 2

Answer:
Product:
Question:
10
Map330,
Map330M
Answer:
Product:
Question:
11
Map330,
Map330M
Answer:
Product:
Question:
12
Map330,
Map330M
Answer:
Product:
Question:
13
Map330,
Map330M
Answer:
Product:
Question:
14
Map330,
Map330M
Answer:
Product:
Question:
15
Map330,
Map330M
Answer:
From any screen, press and hold the mark button for two seconds
and the mark screen is displayed. The "save" button is highlighted
and you can press enter to save the waypoint using the default name
and icon.
How do I save a waypoint with a user-input name?
From any screen, press and hold the mark button for two seconds.
Use the up/down arrows and notice that the highlight moves from
field to field and then back to "save." Highlight the Icon field using the
up/down arrows. Press enter.
Is there a limit to the number of waypoints I can store in the MAP
330 and the MAP 330M?
Yes, the MAP 330 and 330M will store up to 500 user waypoints in
memory.
Why is my GPSnot allowing me to create a message for waypoints?
With the MAP 330 you can only create messages or 200 waypoints.
If you should ever get that many and need to input more, to make
room you will have to delete ones that you no longer need.
How do I create a GOTO route?
The two ways to create a GOTO route are the following:
Creating GOTO using destination waypoint from "Near
Position"
Press GOTO. Use the UP/DOWN arrows to highlight the
category that your destination waypoint is in. Use the left/right arrows
to select near position. Use the up/down arrows to highlight your
choice of waypoint to be your destination and press enter. The
GOTO route is now active and you are returned to the last viewed
navigation screen.
Creating a destination waypoint from the database using
"Alphabetical"
Press GOTO. Use the up/down arrows to highlight the
category that your destination waypoint is in. Use the left/right arrows
to select "Alphabetical". Use the up/down arrows to highlight your
choice of waypoint to be your destination and press enter. The
GOTO route is now active and you are returned to the last viewed
navigation screen
How do I turn on the display waypoint on map screen?
From map screen press the menu button highlight map setup and
use the arrow to select the "display waypoints "and press enter. Use
the arrow to select on and press enter and nav button.
How do I change map orientation from north up to course up?
From map screen press menu button highlight map setup and use
the arrow to select the "orientation" and press enter. Use thearrow to
select on, press enter and nav button.