Changing The Ip Address - Buffalo LinkStation 500 User Manual

2
Click the Host tab, configure the LinkStation's name, and click Apply.
Note: A hostname may contain up to 15 alphanumeric characters.

Changing the IP Address

Note: If no DHCP server is available and the IP address settings are set to acquiring from the server
automatically, then an IP address will be assigned as follows:
IP address: 192.168.0.9
Subnet mask: 255.255.255.0
Do not place two or more LS520D units in such a network environment because of this specification. Their IP
addresses will conflict and cause unexpected behavior.
1
In Preferences, click Network.
2
Click the Network tab.
59