Wake-On-Lan - Buffalo LinkStation 500 User Manual

3
Select Manual, enter the desired network address settings, and click Apply.
Note: The following IP addresses are reserved and should not be used. If you configure one of them by accident,
initialize settings with the function button on the LinkStation.
Local loopback address: 127.0.0.1, 255.255.255.0
Network address: 0.0.0.0, 255.255.255.0
Broadcast address: 255.255.255.255, 255.255.255.0
The IP address range from 224.0.0.0 to 255.255.255.0

Wake-on-LAN

The LinkStation supports Wake-on-LAN, which allows it to be turned on remotely. You can only wake the LinkStation
up when the LinkStation is in sleep (standby) mode.
Note: To use Wake-on-LAN, you'll need Wake-on-LAN software that sends magic packets. The LinkStation does
not include Wake-on-LAN software.
1
In Preferences, click Network.
60