Changing The Ip Address - Buffalo TeraStation Essentials User Manual

Chapter 9 Network Settings
Connection
Jumbo Frame
Jumbo Frame
Compatible Switch
Jumbo Frame
Jumbo Frame
Compatible Switch
Jumbo Frame
Jumbo Frame
Incompatible Switch
Jumbo Frame
Jumbo Frame
Incompatible Switch

Changing the IP Address

Normally, the TeraStation's IP address is set automatically by a DHCP server on your network. If you prefer, you can
set it manually. An easy way to do this is to change it on NAS Navigator2. The procedure to change the IP address in
Settings is below.
Note: If the TeraStation is being used as an iSCSI drive, to change the settings, navigate to Storage > iSCSI in Settings
and move the iSCSI switch to the off position temporarily before changing settings.
1
From Settings, click Network.
2
Click the settings icon (
3
Click Edit.
Jumbo Frame
Compatible PC
Jumbo Frame
Incompatible PC
Jumbo Frame
Incompatible PC
Jumbo Frame
Compatible PC
) to the right of "IP Address".
227
Transmission
Transfer data using
jumbo frames.
Transfer data
without using
jumbo frames.
Transfer data
without using
jumbo frames.
No data can be
transferred.