Customizing The Nav 1 Screen; Nav 2 Screen; Customizing The Nav 2 Screen - Magellan NAV6000 User Manual

Customizing the Nav 1 Screen

In addition to the navigation parameters shown, you may
select SOA, XTE, ETE, BRG, COG, SOG, CTS, TRN, ETA,
VMG, STR, DST and a blank field.
Press the CUSTOM softkey to activate the highlight. Use
the RIGHT/LEFT ARROWs of the CURSOR KEY to
change the navigation parameter as desired. Press the
DOWN ARROW to move the highlight to the next field
you wish to modify. When you have finished customizing
all the fields you wish, press ENTER.

NAV 2 Screen

From the NAV 1 screen, press NXT PG to access the NAV 2
screen.
At the top of the screen the name of the destination waypoint
(if any) is displayed.
The large center window displays Steering (STR), Distance
(DST), Velocity made good (VMG), and Estimated time to
arrival (ETA). Following this information during navigation
will allow you to reach your destination by staying close to
your planned route. These fields can be changed to include
other information using the CUSTOM softkey.
The bottom of the NAV 2 screen displays a Course Deviation
Indicator (CDI). Use the LEFT/RIGHT ARROWs to ad-
26
just the scale. The boat icon on the CDI points in the direc-
tion of COG with respect to Bearing (BRG).
The active softkeys are MENU, ROUTES, CUSTOM and
NXT PG.
Press QUIT to return to the Map screen or NXT PG to go to
the Pointer screen.

Customizing the Nav 2 Screen

In addition to the navigation parameters shown, you may se-
lect CTS, STR, SOA, XTE, ETE, ETA, BRG, DST, TRN,
VMG, COG, SOG, CTS, TRN and a blank field.
Press the CUSTOM softkey to activate the highlight. Use
the RIGHT/LEFT ARROWs of the CURSOR KEY to
change the navigation parameter as desired. Press the
DOWN ARROW to move the highlight to the next field
you wish to modify. When you have finished customizing
all the fields you wish, press ENTER.
Magellan NAV 6000