Transmitting Saved Messages Or Images To Nodes Or Rooms On The Internet; Transmitting Audio Messages; Transmitting Emergency Audio Information To Local Nodes - Yaesu FTM-100DR Instruction Manual

Transmitting saved messages or images to nodes or rooms on the Internet

1
Follow steps 1 to 3 in "Creating and transmitting messages to nodes or rooms on the
Internet" on page 28 to display the data type select screen.
2
Follow steps 3 to 7 in "Creating and transmitting messages to local nodes" on page
26 to select and transmit data.

Transmitting audio messages

You can transmit audio messages spoken into the microphone as data to a local node,
or node or room on the Internet.
Audio files are categorized into the following two types:
EMERGENCY:
NEWS STATION:
(LOCAL NEWS)

Transmitting emergency audio information to local nodes

1
Follow steps 1 to 4 in "Viewing text data in local nodes" on page 17 to display the
menu list of the local node.
2
Rotate the DIAL to select [EMERGENCY].
3
Press and hold [PTT].
"EMERGENCY Upload?" appears and beep sounds
for three seconds.
Releasing [PTT] cancels the upload of emergency
Tip
information.
4
While pressing [PTT], speak into [MIC].
Emergency information. Depending on the node or room settings,
mandatory updates are supplied to connected nodes and rooms
in five-minute intervals for two hours starting from the initial
dissemination of the news.
Routine message. You can listen to the message anytime you
want as long as the message is not deleted from the node or
room.
Using the News Function of WIRES-X
29
MIC
ABC DEF
A
1 2 3
GHI JKL MNO
4 5 6 B
PQRS TUV WXYZ
7 8 9 C
0 D
DTMF MICROPHONE
MH-48