Communicating With Others - Yaesu FTM-100DR Instruction Manual

Connecting to a Faraway Station Using WIRES-X
● Specifying the DTMF ID of the node or room you want to connect to
1
Press and hold [#] on the microphone for over one second.
Displays the DTMF input screen.
2
Use the numeric keys on the microphone to enter the DTMF
ID (five-digit code).
3
Press [#] on the microphone.
Tip Pressing [*] on the microphone closes the DTMF input screen.

Communicating with others

1
While displaying the station you are currently
connected to, press [PTT].
The transceiver switches to transmission mode.
2
Speak into [MIC].
Tip Place the microphone about 5 cm away from your
mouth when you speak.
Caution Do not continuously transmit over an extended
period of time to reduce the risk of overheating,
malfunction, and injury.
3
Release [PTT].
The transceiver switches to reception mode.
Tip
You can communicate with the node or room you are connected to by pressing
viewing data in a node or room on the Internet using the NEWS function in digital mode.
12
MIC
ABC DEF
1 2 3 A
GHI JKL MNO
4 5 6 B
PQRS TUV WXYZ
7 8 9 C
0 D
DTMF MICROPHONE
MH-48
MIC
ABC DEF
1 2 3 A
GHI JKL MNO
4 5 6 B
PQRS TUV WXYZ
7 8 9 C
0 D
DTMF MICROPHONE
MH-48
[PTT]
even when