Yaesu FTM-100DR Instruction Manual page 11

● Searching by node or room name
1
Press and hold
Displays the category list.
2
Rotate the DIAL to select [SEARCH & DIRECT],
then press
Displays the character input screen.
3
Enter all or part of the user ID or room name.
The characters you have just entered appear on the
screen.
Tip For details on how to enter letters, refer to "Inputting
Characters" on page 7.
4
Press .
Starts searching. If connection destinations with the first part of a name partially
matching the name you entered are found, they will be listed.
Tips • If there is no connection destination matching the entered name, "No Data" appears and
then the screen returns to the "SEARCH & DIRECT" screen. Enter characters to search
by again.
• If the name you entered is found, the transceiver establishes connection immediately.
• The screen displays the room list search results followed by the node list search results.
• On the room columns in the search results, the number of activities (the number of nodes
connected to each room) appears on the right side.
5
Rotate the DIAL to select the node or room you want
to connect to, then press
Starts connection.
Tip By pressing
Once connection is successfully established, the menu list of the node (room) you
are connected to will appear.
● Connecting to the node or room you have most recently connected
If you have previously connected to a node or room on the Internet, it appears and
flashes on the upper part of the screen.
Press to start connection of the transceiver to the flashing node or room, and
once connection is established, the menu list of the node (room) you are connected to
will appear.
If there is on the left side of the node name on the
upper part of the screen, rotate the DIAL to display the
node you have most recently connected to.
Connecting to a Faraway Station Using WIRES-X
for over one second.
.
.
[PTT],
you can also establish connection while talking.
11