Account/Call Settings - Grandstream Networks GXV3240 Administration Manual

ACCOUNT/CALL SETTINGS

Start Video Automatically
Video Layout
Remote Video Request
Disable Presentation
Dial Plan Prefix
Disable DialPlan
Dial Plan
Firmware Version 1.0.3.46
It is used to set if the phone system will enable the video feature
automatically when it makes an outbound call. If set to "Yes", the video
codec attributes will be included in the SIP INVITE message. Or the
attributes will not be included. The default setting is "Yes".
It is used to set if the phone enables the full-screen mode or just display
the remote video in full screen mode while answering a video call. The
default setting is "No".
It is used to set the preference to handle video request from the remote
party during an audio call. It can be selected from the dropdown list.

"Prompt": A message will be prompted if a video request is
received. Users can select "Yes" to establish video or "No" to
reject the request.

"Accept": Video request will be accepted automatically and
video will be established.

"Deny": Video request will be rejected automatically.
The default setting is "prompt".
It is used to configure whether to receive presentation information
during conference with GVC3200. If set to "Yes", the device will disable
receiving presentation during conference. The default setting is "Yes".
It is used to configure the digits prepended to the dialed number.
It is set to enable/disable the Dialplan mechanism for different cases.
If the specific case is checked, the Dialplan mechanism will be
disabled.

Dial Page: It controls the pattern of dialing numbers from the
keypad, phone app and account widget.

Contact: It controls the pattern of dialing numbers from local,
LDAP and Broadsoft contacts.

Incoming call history: It controls the pattern of dialing numbers
from inbound call logs.

Outgoing Call History: It controls the pattern of dialing
numbers from outbound call logs.

MPK&Click2Dial: It controls the pattern of dialing numbers
from MPK app and the link on the webpage.
The default setting is unchecking all the cases.
It is used to configure the dial plan to establish the expected number
and pattern of digits for a telephone number. This parameter
configures the allowed dial-plan for the phone.
GXV3240 Administration Guide Page 61 of 117