Using The Full Size Power Nozzle - Simplicity Moxie Owner's Manual

Using the Power Nozzle
After turning on the canister, lower the wand
by pressing the left pedal on the back side of
the power nozzle.
Turning On the Power Nozzle
The power nozzle can only be turned on if
the canister is also turned on (canister on /
off switch is located on the main body). The
power nozzle on/off button is located on the
handle. Simply press the Power Brush button
to engage the power nozzle.
Removing and Inserting the Wand
Removing the wand from the power nozzle
allows you to use cleaning tools for baseboard
or ceiling cleaning. To do this, first turn the
power nozzle and canister off. Then, press
the wand release collar pictured below and
pull the wand out.
To reinsert the wand into the power nozzle,
simply press the wand back into the neck of
the power nozzle. The wand will then "click"
into place.

Using the Full Size Power Nozzle

Carpet Height Adjustment
Your power nozzle has six different settings
to clean a variety of carpet types and floor
surfaces. To adjust the carpet height setting
of the power nozzle, press the right pedal
located on the back of the power nozzle.
Each press of this pedal will adjust the height
to the next carpet height position.
To determine which setting you are currently
on, look through the height indicator window
on the top of the unit. You will see one of the
six settings detailed below:
Setting:
1. XHI
2. HI
3. Auto
4. MED
5. LO
6. XLO
9
Intended Use:
Very plush carpet
Plush carpet
General carpet thickness
or bare floors
Medium pile carpet
Low pile carpet
Indoor/Outdoor carpet