Simplicity Moxie Owner's Manual page 12

Maintenance and Care
Replacing the Power Nozzle Belt Cont.
Insert the brushroll back into the brushroll tray
and place the belt guard back into position.
Place the metal bottom plate onto the unit
(insert the front end of the bottom plate first).
Re-insert the two bottom screws and secure.
Replacing the Bulb
IMPORTANT: Before performing any maintenance
work on the power nozzle, always unplug the
vacuum cleaner and disconnect the wand.
Turn the power nozzle over and remove the
bottom plate by first removing the two bottom
plate screws located by the rear wheels.
Remove the two top cover screws.
Turn the power nozzle back over, push the neck
flat, and remove the top cover.
Simply pull the bulb out (no twisting) and reinsert
a factory-authorized bulb. Place the top cover
back on the unit, turn the machine over and
re-insert the two top cover screws. Reinstall the
bottom plate.
12
Light bulb