Maintenance And Care; When To Change The Vacuum Bag / Full Bag Indicator; Replacing The Vacuum Bag - Simplicity wonder Owner's Manual

MAINTENANCE AND CARE

When to Change the Vacuum Bag
The Full Bag Indicator changes to red to show
when the bag is full or when there is a clog
in the vacuum (Fig. 1).
The indicator could also turn red when
vacuuming fine powders such as flour or
drywall dust. These materials can quickly
block the bag pores, significantly reducing
airflow before the bag is actually full. The
vacuum bag should still be changed.
The indicator may also turn red during
attachment cleaning. If the indicator changes
to green when attachments are no longer
in use, the vacuum bag does not need to
be changed.
NOTE: The vacuum bags are disposable and
should only be used once. Do not attempt
to reuse the bag, as suction and filtration
performance will be greatly reduced.

Replacing the Vacuum Bag

Change the vacuum bag when the full bag
indicator changes from green to red or when
the suction power is weak.
• Open the bag compartment lid (Fig. 2).
• Pull the tab on the bag collar, which
closes the bag while removing it from
the bag holder.
• Remove and discard the used bag.
• Slide a new bag into the bag holder until
it clicks into place.
• Close the bag compartment lid.
8
Fig. 1
Fig. 2