Removal And Replacement Of Components; Refrigeration Circuit; [A] Applicable Parts; Evaporator Assembly - Hoshizaki FM-300AKE-HC Service Manual

V. REMOVAL AND REPLACEMENT OF COMPONENTS

1. REFRIGERATION CIRCUIT

This machine contains flammable refrigerant. Do not attempt to break into the refrigerant
circuit unless qualified, competent and authorised to do so.
If any component of the refrigeration circuit requires removal or replacement, please contact
the manufacturer:
HOSHIZAKI EUROPE LIMITED
Telford 70 Stafford Park 7, Telford, Shropshire TF3 3BQ UK
Tel: +44 (0)1952-291777
Fax: +44 (0)1952-292777

[a] APPLICABLE PARTS

Refrigerant (R290)
Compressor
Evaporator Casing
Air-cooled Condenser
Drier
Thermal Expansion Valve (with MOP)

2. EVAPORATOR ASSEMBLY

See the exploded view under "III. 3. ICEMAKING MECHANISM".
1) Push the stop button to drain the water in the evaporator.
2) Disconnect the power source.
3) Remove the panels.
4) Remove the three thumbscrews, and take off the spout from the evaporator.
5) Remove the bin control switch.
6) Remove the spout gasket at the top of the evaporator.
CUTTER
7) Remove the bolt and lift off the cutter.
WARNING
47