Removal And Replacement Of Components; Panels; [A] Front Panel (Upper) (Serial Number: K0 Or Earlier); [B] Front Panel (Lower) (Serial Number: K0 Or Earlier) - Hoshizaki DIM-30DE-2 Service Manual

VII. REMOVAL AND REPLACEMENT OF COMPONENTS

1. PANELS

[a] FRONT PANEL (UPPER) (Auxiliary code: K0 or earlier)
1) Unlock the front panel (upper) by turning the keyhole counterclockwise with a flat
blade screwdriver. Unscrew and lift off the front panel (upper). See Fig. 1 in "III. 1. IN
CASE OF DIRTY WATER".
2) To refit the front panel (upper), push down the top while turning the keyhole
clockwise. See Fig. 2 in "III. 1. IN CASE OF DIRTY WATER".
[b] FRONT PANEL (LOWER) (Auxiliary code: K0 or earlier)
1) Remove the louver, and turn off the power switch.
2) Remove the front panel (upper).
3) Remove the two screws securing the top of the front panel (lower).
4) Tilt the top of the front panel (lower) slightly toward you, and lift it off.
5) Disconnect the drain hose from the ice station.
6) Remove the connectors from the front panel (lower).
7) To refit the front panel (lower), reconnect the connectors and drain hose, put the
bottom into the unit base, and secure the top with the screws.
[c] FRONT PANEL (Auxiliary code: K1 or later)
1) Remove the louver, and turn off the power switch.
2) Remove the screw securing the bottom of the front panel.
3) Remove the front panel. See Fig. 3 in "III. 1. IN CASE OF DIRTY WATER".
4) Disconnect the drain hose from the ice station.
5) Remove the connectors from the front panel.
6) To refit the front panel, reconnect the connectors and drain hose, hook the top onto
the top panel, and secure the top with the screws.
57