Table of Contents
Advertisement
Push the drain hose onto the spigot and secure with a
clip, ensure a loop is formed in the drain hose to pre-
vent waste from the sink entering the appliance.
If the outlet spigot has not been used before, remove
any blanking plug that may be in place.
• Directly into a drain pipe at a height of not less than
60 cm and not more than 100 cm.
Connections overview
Electrical connection
• The appliance must be earthed.
Downloaded From WashingMachine-Manual.com Manuals
The end of the drain hose
must always be ventilated,
i.e. the inside diameter of
the drain pipe must be
larger than the outside di-
ameter of the drain hose.
The drain hose must not
be kinked.
115 cm
115
c
m
100
c
m
• Directly to a built-in drain pipe in the room wall.
The drain hose may be extended to a maximum of 4
metres. An additional drain hose and joining piece
is available from your Local Centre.
140 cm
150
• Make sure that the electrical information on the rating
plate agree with your domestic power supply.
9 0
c
m
c
m
9
Hide quick links:
Advertisement
Table of Contents
