Zanussi ZWG 680P User Manual page 13

Set your washing programme
The control panel permits to select a washing programmes and different options.
When an option button is selected, the corresponding pilot light is on. Otherwise it is off.
For compatibility among washing programmes and options, see the "Washing Programme Chart". If an incorrect
option is selected, the integrated red pilot light of the button 6 flashes 3 times.
Programme selector dial
1
Temperature button
2
Downloaded From WashingMachine-Manual.com Manuals
1
Turn the programme selector dial to the required programme. The selector
dial can be turned either clockwise or counter-clockwise. The green pilot
light of the button 6 starts flashing: the appliance is now switched on.
times to indicate a wrong selection. The appliance will not perform the new
selected programme.
• To switch the appliance off, turn the programme selector dial to the posi-
• To cancel or change a running programme, switch the appliance off by
95°
60°
40°
Push the temperature button to select the most suitable temperature for
30°
washing your laundry .
2
If you turn the programme selector dial to another programme when
the appliance is working, the red pilot light of the button 6 will flash 3
tion .
turning the programme selector dial to the position
programme by turning the selector to the desired programme. Start the
new programme by pressing the button 6 again. The water in the tub will
be not emptied out.
3 4 5 6
7.1
7.2
7.3
. Select the new
13