Protecting Photos - Canon XF300 Instruction Manual

Photo Operations
5 Select [OK] and then press SET.
• Select [Cancel] instead to cancel the operation.
• The selected photo is deleted.
• If a custom picture file is embedded in the photo, it is also deleted.
6 When the confirmation message appears, press SET.
Deleting All Photos
1 Open the [Delete All Photos] submenu.
[J Other Functions]
2 Select [OK] and then press SET.
• All of the photos on the SD card will be deleted.
• Select [Cancel] instead to cancel the operation.
• While the photos are being deleted, you can press SET to cancel.
3 When the confirmation message appears, press SET.
IMPORTANT
• Be careful when deleting photos. Deleted photos cannot be recovered.
NOTES
• Protected photos cannot be deleted.

Protecting Photos

You can protect photos to prevent accidental erasure. The custom
picture file embedded in such a photo is also protected. Photos can be
protected from the photo playback screen or [Photos] index screen.
Operating modes:
Protecting a Photo from the Playback Screen
1 Display the photo to be protected.
• Refer to Viewing Photos (0 163).
2 Press SET to open the photo menu.
3 Select [Protect] and then press SET.
• To remove protection settings from a protected photo, select
[Unprotect] instead.
• The screen prompts you to confirm the operation.
4 Select [OK] and then press SET.
• Select [Cancel] instead to cancel the operation.
• The selected photo is protected and h appears on the bottom left
portion of the screen.
• If a custom picture file is embedded in the photo, it is also protected.
Downloaded From VideoCamera-Manual.com Manuals
[Delete All Photos]
Photos
[J Other Functions]
[Delete All Photos]
7
165